ISD02 - Läpinäkyvä - Autotallin nosto-ovet maahantuojalta

Teollisuusovet ISD02 (läpinäkyvät) on kokonaan tai osittain ikkunapaneeleista. Rungot on valmistettu erikois alumiiniprofiileista, mikä tarkoittaa, että ISD02 ovet ovat yhtä kestäviä kuin ISD01 ovet. Ikkunapaneelit on valmistettu polykarbonaattista, joka kestää koviakin iskuja. Ikkunapaneeleissa on erikoispinnoite, joka estää ikkunoiden huurtumista.

Tekniset tiedot | Rakenne | Mallit | Vaihtoehdot ja lisävarusteet

Tekniset ominaisuudet

Width 2000-6000 mm
Height 2000-8000 mm

SPECIFICATIONS
The above heat transfer resistance	1,13 m²· 0С/Вт
Acoustic insulation	24 dB
Wind load	460 Па (458 km/h)
Watertightness	250 Pa
Lifting force	250 Н
Door leaf weight	11,2 kg/m²

Rakenne

Panoramic Panel

Panels of DoorHan full vision sectional doors are constructed of aluminium profiles and glazing units. Glazing materials are polycarbonate, impact-resistant polycarbonate or acrylic plastic (Plexiglas). These materials are lightweight, strong and have a no-drop coating. The design of the aluminium profiles provides high reliability and durability of the door leaf. For increased thermal insulation DoorHan offers combined doors with DoorHan panoramic and sandwich panels.

San

SAN offers such advantages as:

high optical visibility
low weight
weatherability

Polykarbonate

Polycarbonate is a transparent amorphous polymer which exhibits outstanding physical properties such as high impact resistance, heat resistance and excellent clarity. The strength of polycarbonate sheets is permanent in any weather conditions within a temperature range from –40 to 120°C. Panels with polycarbonate glazing have an increased level of light transmission of up to 91% and their properties do not change even under long-term exposure to direct sunlight.

Ovirakenne

Jousien turvalaite

Jousen turvalaite estää ovilevyn putoamasta, jos jousi katkeaa.

Kaapelin katkeamissuoja

Katkeamissuoja estääovea putoamasta, josoven kaapelikatkeaa.

Kaapelin turvalaite

Kun autotallin ovi suljetaan tai jos kaapeli katkeaa, ovi lukittuu paikalleen.

Vahvistetut saranat

Vahvistettuja saranoita käytetään suurissa nosto-ovissa (ISD01).

Matalanosto, rumpu takana

Standardi nosto

Matala nosto, rumpu edessä

Korkea nosto

PARAMETER	DESCRIPTION	CALCULATION FORMULA
H, mm	Opening height	H
h, mm	Lintel height	h > 600
В, mm	Opening width	B
HL, mm	Distance fr om vertical guide level till opening	<h-250
A, mm	Height of vertical guides	H+HL
Ab, mm	Height of shaft axle and drum	A+86
A1, mm	Size, limiting working zone of doors before vertical guides	A-500
A2, mm	Size, limiting working zone of doors before horizontal guides	A-110
A3, mm	Size, lim iting working zone of doors (without drive or with shaft drive)	Aа+120
E, mm	Length of horizontal guides	H-нL+350
В1, mm	Coordinate of intermediate point for fixing guides to ceiling	E/2
Db, mm	Working zone of torsion mechanism	Depends on opening dimensions and board weight
S, mm	Minimum lateral space	120
Q, mm	Zone of shaft drive location	240

Standardi vino nosto

Korkea vino nosto

PARAMETER	DESCRIPTION	CALCULATION FORMULA
H, mm	Opening height	H
h, mm	Lintel height	HL+(20+1260)
В, mm	Opening width	B
A, mm	Angle post height	H+HL+(250… 990)
Ab, mm	Height of shaft axle and drum	A+86
A1, mm	Size, limiting working zone of doors before vertical guides	H-270
A2, mm	Size, limiting working zone of doors before horizontal guides	H-110
E, mm	Size, limiting working zone of doors deep into garage	H-HL+(250+1000)
В1, mm	Coordinate of intermediate point for fixing guides to ceiling	E/2
Db, mm	Working zone of torsion mechanism	Depends on opening dimensions and board weight
S, mm	Minimum lateral space	120
a⁰	Tilt angle of guides to horizontal line	<65
Q, mm	Zone of shaft drive location	240

Vertical lift, low drum

Pystysuora nosto, rumpu alhaalla

Korkea vino nosto, rumpu alhaalla

High lift isd low drum

Mallit

Types of panoramic door filling:

polycarbonate;
impact-resistant polycarbonate (transparent panels);
louvered organic glass Alltop (transparent panels);
louvered organic glass Resist (opaque panels);
louvered organic glass Heatstop (opaque pearl panels).

Standard colours of aluminium profiles

Partially glazed door

Standard glazed door

Fully glazed door

Fully glazed door with braces

Partially glazed door with pass door

Standard glazed door with pass door

Cassette

Värit

Vaihtoehdot ja lisävarusteet

Basic configuration:

torsion springs, designed for 25,000 opening/closing cycles of the doors;
spring break protection device;
cable break protection device;
rubber stoppers or dampers (according to the selected design);
step-handle;
latch;
technical documentation package.

Options:

torsion springs, designed for 50,000, 75,000 and 100,000 opening/closing cycles of the doors;
windows of two types;
pass door with linear door closer;
optional cable break protection device;
latch lock;
automatic devices;
manual chain operator.

Ikkunat

Round or rectangular windows, made of impact-resistant polycarbonate, can be cut into DoorHan industrial doors. Due to their special design, they are snug against the door leaf; this protects it from freezing and prevents heat losses along the window perimeter. The round window has diameter 360 mm, and it is made with silver (RAL 7001) edging. The rectangular windows are made with black edging; their dimensions 635х330 mm and 607х202 mm.

Ikkunan mitat — 638 x 334 mm

Ikkunan mitat — 588 x 181 mm

Lukot

The latch lock is designed for locking the doors in a closed position from two sides. It is made of grade steel; it is also reliable and burglary resistant. Owing to this the lock is a significant obstruction during the unauthorized opening of the doors.

Kahvat

All DoorHan sectional doors are equipped with special handles for manual opening of the doors. Owing to their ergonomic shape this process does not require extra efforts in spite of the door weight.