RMH ja RMY siirrettäviä lastausramppeja käytetään, kun lastaus / purku tapahtuu maahan, ja kuormaussiltaa ei voida käyttää. Ne eivät vaadi kiinteää asennusta. Siirrettävän lastausrampin kulmaa voidaan säätää manuaalisesti, hydraulisesti tai sähköhydraulisesti. Lastausramppi on varustettu turvajärjestelmällä, joka estää rampin liikkumisen käytön aikana. Lastausramppi voi toimia alhaisessa lämpötilassa (jopa -50 C).
.
Tekniset tiedot
| TEKNISET TIEDOT | |
|---|---|
Technical specfications | Parameters |
Length, mm | 12 000/9 000 (other upon request) |
Width, mm | 2 300/3 000* |
Horizontal part length, mm | 2 000/2 360/3 000 |
Passage way width, mm | 1 920/1 970 |
Lip length, mm | 340 |
Working range, mm | 900–1 700 |
Amount of lift cylinders** | 2 |
Load capacity, kg | 6 000/10 000 (other upon request) |
Supply voltage, V** | 380, 3 phases |
Colour*** | Signal blue (RAL 5005) (other upon request) |
Rakenne
- Access ramp
- Grid deck
- Pendulum
- Lift cylinder
- Transport mechanism
- Transport support (for primary transportation of a ramp from a manufacturer to its site)
- Control unit (for mobile ramps with a hydraulic electric operator)
The side bearing profile of the mobile ramp is made of I-beam 360 mm; transverse profiles are made of I-beam 100 mm. The roadway deck is made of steel galvanized grids on the base of bearing strips 30х3 mm with ribs made of twisted square bar 5 mm. The ramp in its standard version is designed for loading-unloading by means of a standard four-wheel loader with inflatable tyres, if the maximum pin load does not exceed 1.3 N/mm2. It is necessary to order the special ramp fabrication (maximum load – 6.5 N/mm2) for equipment, having the high pin load, for example, electric stackers. The access ramp is made of 12 mm thick steel ribbed plates with 1.2-3.6 mm high ribbing. The ramp approach is also manufactured of 8 mm steel ribbed plates with 0.8-2.4 mm high ribbing. The small potential deformation of the grids and the ramp approach deck is possible; this does not affect the product operation изделия.
Vaihtoehdot ja lisävarusteet
| STANDART | OPTIONAL | |
|---|---|---|
| Colour | blue (Ral 5005) | any, per order |
| Access ramp | 340 mm, bevel 35 mm | |
| Hydraulic electric drive | 2 lift cylinders | oil for work at low temperatures |
| Permissible load | 6000/10000 kg | per order – different |
| Operating range | from 900 to 1,500 mm | per order – different |